Raleigh Pedelec Groove 2.0, User Manual, Page: 215 / 321

Original User Manual | Groove 2.0 23
Fitting:
1. Slide the cable ties with the cable on to the fork leg.
2. Fit the front wheel.
➠
Chapter 18.2.1 "Original User
Manual | General" (CD) .
3. Plug the two halves of the connector together. Take
notice of the arrows on the connectors – they must be
facing one another!
4. Slide the two cable ties back up the fork until they
remain in place of their own accord and cannot slip.
11 Removing and fitting the front
wheel
Removal:
1. Pull apart the upper and lower halves of the electrical
connector that is located at the rear of the fork.
2. Slide the cable tie downwards from the fork, or cut it.
3. Remove the front wheel.
➠
Chapter 18.2.1 "Original
User Manual | General" (CD).
12 Technical data
MOTOR
Definition Brushless electric motor with gear unit and freewheel
Output 250 W
Maximum torque 35 Nm
Weight of motor 2.88 kg
Assist levels 70, 150, 250 watts
Control Via speed sensor
Switch-off speed 25 km/h at the highest assistance level
BIKE TYPE
MAXIMUM PERMITTED GROSS WEIGHT
(bike, rider, luggage, t load)
WEIGHT OF RIDER
Pedelec 130 kg 105 kg max.
LI-ION BATTERY
Rated voltage 36 V
Rated capacity 9 Ah
Energy
324 Wh
Weight 2.4 kg
Permitted charging temperature 0 to 45°C
Recommended charging temperature +10 to +30°C
Recommended storage temperature +18 to +23°C
CHARGER
Charging time 6 to 7 hours
Number of battery cells 40
Weight
450 g
Protection class only in a dry envi-
ronment
Charging temperature 0 to 45°C
Storage temperature -20 to +40°C
DISPLAY AND CONTROL UNIT
Protection class IP 65 (protected
against dust,
splashes and
water)
Weight 90 g
Operating temperature -20 to +60°C