Raleigh 2008 Owner'S Manual Download Page 6

6

which  might  have  been  avoided  if  the  rider  had  worn  an 
appropriate helmet. 

!

  WARNING: Failure to wear a helmet when riding may result 

in serious injury or death.

 

2. Always do the Mechanical Safety Check (Section 1.C) 

before you get on a bike.
 

3. Be thoroughly familiar with the controls of your bicycle: 

brakes (Section 4.A) and pedals (Section 4.C).
 

4.  Be  careful  to  keep  body  parts  and  other  objects 

away from the sharp teeth of chainrings; the moving chain; 
the turning pedals and cranks; and the spinning wheels of 
your bicycle. 
 

5. Always wear: 

 

• Shoes that will stay on your feet and will grip the pedals. 

Never ride barefoot or while wearing sandals. 
 

• Bright, visible clothing that is not so loose that it can be 

tangled in the bicycle or snagged by objects at the side of 
the road or trail. 
 

•  Protective  eyewear,  to  protect  against  airborne  dirt, 

dust and bugs — tinted when the sun is bright, clear when 
it’s not.
 

6. Ride at a speed appropriate for conditions. Increased 

speed means higher risk.
 

7. Before you attempt to jump, do stunt riding or race with 

your bike, read and understand Section 2.G. Downhill, Stunt or 
Competition Biking.

B.  Riding Safety
 

1. Observe all local bicycle laws and regulations. Observe 

regulations about licensing of bicycles, riding on sidewalks, laws 
regulating bike path and trail use, and so on. Observe helmet 
laws and special bicycle traffic laws. It’s your responsibility to 

the suspension responds to brake application and rider weight 
shifts. See paragraph B.5 above and Section 4.F.
 

Check out the handling and response of the bike; and 

check the comfort. 
 

If you have any questions, or if you feel anything about the 

bike is not as it should be, take the bike back to your dealer 
for advice.

2. Safety

!

 WARNING:  Many states require specific safety devices. 

It is your responsibility to familiarize yourself with the laws of 

the state where you ride and to comply with all applicable 

laws, including properly equipping yourself and your bike as 

the law requires.

 

An important note to parents: Appendix A of this Manual 

contains  some  rules  and  lessons  which  adults  are  already 
expected  to  know,  but  which  children  need  to  be  taught 
and  to  have  frequently  reinforced.  Please  take  the  time 
to  familiarize  yourself  with  Appendix  A  as  well  as  with  the 
information  below,  and  to  teach  these  rules  to  your  child 
before you let your child ride unsupervised.

A.  The Basics
 

1.  Always  wear  a  cycling  helmet  which 

meets  the  latest  certification  standards  and 
is  appropriate  for  the  type  of  riding  you  do. 
Always

 

follow  the  helmet  manufacturer’s 

instructions for fit, use and care of your helmet. 
Most serious bicycle injuries involve head injuries 

Summary of Contents for 2008

































Reviews: