Raleigh 2008, Owner'S Manual, Page: 10 / 32

10
We recommend against this type of riding because of
the increased risks; but if you ignore this recommendation,
at least:
• Take lessons from a competent instructor first
• Do stunts, racing or fast downhill riding only in areas
designated for this type of riding
• Start with easy learning exercises and slowly develop
your skills before trying more dangerous riding
• Wear a full face helmet, safety pads, and other
safety gear
• Make sure by checking with your dealer that your bike
is suitable for the kind of stunt or competition riding you plan
to do
• Understand and recognize that the stresses imposed on
your bike by this kind of activity may break or damage parts
of the bicycle and void the warranty
• Take your bicycle to your dealer if anything breaks or
bends. Do not ride your bicycle when any part is damaged.
If you ride downhill at speed, do stunt riding or ride in
competition, you voluntarily assume an increased risk of
injury or death. Have your bicycle and equipment carefully
inspected by a qualified mechanic and be sure it is in perfect
condition. Consult with expert riders and race officials on
conditions and equipment advisable at the site where you plan
to ride. Wear appropriate safety gear, including an approved
full face helmet, full finger gloves, and body armor. Know the
limits of your skill and experience. Ultimately, avoiding injury is
your responsibility.
H. Changing Components or Adding Accessories
There are many components and accessories available
to enhance the comfort, performance and appearance
of your bicycle. However, if you change components or
add accessories, you do so at your own risk. The bicycle’s
manufacturer may not have tested that component or
accessory for compatibility, reliability or safety on your
bicycle. Before installing any component or accessory,
including a different size tire, make sure that it is compatible
with your bicycle by checking with your dealer. Be sure to read,
understand and follow the instructions that accompany the
products you purchase for your bicycle.
!
WARNING: Failure to confirm compatibility, properly install,
operate and maintain any component or accessory can result
in serious injury or death.
!
CAUTION: Changing the components on your bike may
void the warranty. Refer to your warranty, and check with your
dealer before changing the components on your bike.
3. Fit
NOTE: Correct fit is an essential element of bicycling safety,
performance and comfort. Making the adjustments to your
bicycle which result in correct fit for your body and riding
conditions requires experience, skill and special tools. Always
have your dealer make the adjustments on your bicycle; or,
if you have the experience, skill and tools, have your dealer
check your work before riding.
Make sure the bike fits. A bike that’s too big or too small is
harder to control and can be uncomfortable.