7
2021 RALE® ST120 INSTALLATION GUIDE
NOTICE
Not all OEM shocks have this same configuration. Refer to the
model specific Fit Kit Guide, shipped with the Fit Kit.
NOTICE
The shock spacer should be between the shock heim joint and the
shock rotator. Some kits may not have a shock spacer.
\
1. Install shock extender in the lower shock clevis using OEM bolt
and or nut.
2. Install shock rotator with the shock spacer on top, use provided
hardware.
3. Measure and record the spring length. ______
4. Loosen the shock spring pre-load adjuster to relieve all spring
pre-load from the shock.
S
h o c k
P
r e Pa r aT i o n
