2021 RALE® ST120 INSTALLATION GUIDE
6
S
k i
i
n S Ta l l aT i o n
1. Remove the host bike front wheel and retain the axle for securing
the ski tower.
2. Ensure the correct length ski spacers are installed as outlined on
the fit kit page.
3. Fit the ski tower into position.
4. Insert the axle and tighten to the OEM host bike manufacturer’s
specifications.
5. Install the inside fork clamps. Use blue Loctite® 243 on the four
screws that hold the fork clamps. Torque to 160 IN-LB.
6. Install the outside fork clamps. Use blue Loctite® 243 on the four
screws that hold the fork clamps. Torque to 100 IN-LB.
