6.2 Connecting the PoE Adapter
Step 1.
Connect the Ethernet cable from the enclosure to the Ethernet port labeled POE on the adapter.
Step 2.
Connect an Ethernet cable from your LAN network to the Ethernet port labeled LAN on the adapter.
Step 3.
Connect one end of the power cord to the adapter. Connect the other end of the power cord to a power outlet.
6.3 Weather Protection
To better protect the Ethernet cable gland and the antenna connector from the weather, you need to cover them with
PVC tape.
Step 1.
Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap
according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the end of
the connector.
