Issue A Nov 2011
Page 5 of 5
Program the WAVFR functions
The WAVFR is programmed in a similar way to a Rako Wired Wallplate
.
The edit screen includes
Input Enable buttons
.
Press in the buttons that correspond to WAVFR
inputs that have switches or logic inputs connected. Leave the buttons for any unused inputs
unpressed. Compare the Input Enable buttons on this screen with figure 3. In each case only inputs
A,B,C are in use.
Each Map has a Source and Action.
In this example the Source is that Input A is Made (Logic Low) for any time greater than zero
seconds. Each of the Source Buttons has a check box. This is used to set which inputs are used to
determine when this particular Map get triggered.
The Action for this map is that a Room 6, Scene 1 command is sent.
Other Maps will have different (or the same) source and will send appropriate commands.
________________________________________________________________________________
Technical Support
For more information contact Rako Controls Ltd 01634 226666
www.rakocontrols.com
Input Enable Buttons
The current Map
being Edited