Issue A Nov 2011
Page 4 of 5
Add the WAVFR to the system
. Give the
WAVFR a room number and name. Then press
Add
button followed by
Quit
The room number itself is not too important. Much more
important is that the WAVFR has its own unique identity.
It must not exist with the same
Device Number
as a
different device (WallPlate, RakLink etc) that is in the
same logical room. The Advanced Options check box will
allow manual setting of Device Number if this is proving
to be a problem
Wired Volt Free Setup screen will be shown:
Press
Update List
Button
to make the new WAVFR appear on list at bottom LH Corner. (The Default
WAVFR can be deleted from the list).
The new WAVFR should now appear as On-line. If it does
not, try Updating the List again, or even closing &
reopening this setup screen (Under
Controls-Wired-
WAVFR
tab)
