Diagnostic features of the WA-NEX
Diagnostic using circuit board LEDs
Each of the network diagnostic LEDs at the top of the PCB (A-F) gives information on the
state of either side (Master and remote) of the wired network.
A (Master In)
:
Blue LED. This LED will flash whenever a command is received by the WA-NEX from the
master side of the network.
B (Master Error)
:
Red LED. Will display solid if no network can be found on the Master side of the WA-NEX.
Will flash red if there is a network connected on the Master side but there is an error in
communication (likely cabling fault).
C (Remote In)
:
Blue LED. This LED will flash whenever a command is received by the WA-NEX from the
remote side of the network.
D (Remote Error):
Red LED. Will display solid if no network can be found on the Remote side of the WA-NEX.
Will flash red if there is a network connected on the Remote side by there is an error in
communication (likely cabling fault).
E (Master Out)
:
Blue LED. This LED will flash whenever a command is transmitted but the WA-NEX to the
Master side of the network.
F (Remote Out)
:
Blue LED. Blue LED. This LED will flash whenever a command is transmitted by the
WA-NEX to the Remote side of the network.
WA-NEX
Manual Version 1.1.1
