![rako WA-NEX Instruction Manual Download Page 4](http://html1.mh-extra.com/html/rako/wa-nex/wa-nex_instruction-manual_783010004.webp)
- When prompted press and hold the setup button on the WA-NEX. When the “A” status LED
begins to flash release the setup button.
Once the WA-NEX has been added as a device it will appear in device list:
NB
It is not necessary to setup the WA-NEX as a device in the software for it to successfully
partition the system: the WA-NEX can be used as a plug and play device.
It is advisable that the WA-NEX is set up for two reasons. Firstly it is a good idea to have the
presence of the device visible on the software as a record for any future work. There are
also diagnostic tools and information available from the software that may help with fault
finding if cabling problems remain on the wired network.
WA-NEX
Manual Version 1.1.1