Don't update previous room:
If this box is ticked this map will not update the “last used” flag for both room and channel.
When a “last used” is sent from this device the most recent room and channel sent which
doesn't have “don't update previous room” selected will be sent.
Set Scenes only if lights are OFF:
Ticking this box means that if the command sent in the “output action” section is a scene it
will only take effect if the lights are currently off. This is often used when the device
interfacing with the RMR-VF is a presence sensor.
Any input Trigger (OR Logic):
Use only when combined inputs are required: see Application sheet (LINK) “Combing Volt
free inputs” for further information.
Output action
This tile is used to set the command sent from the input defined in the other two sections.
Before being altered the room will be the local room for that keypad. All the rooms in the
project will be in the drop down menu as will an option for “previous room”.
The next drop down menu can be used to change the channel affected by this command.
Usually “all channels” is selected so that the entire room will be affected by this map. All the
channels added in the room editor will appear in this drop down menu as will “last used” and
“custom”.
NB
Previous room/channel will set the room number to that which was last sent by this device. It will
not track commands sent by any other device.
The last used function sets the channel to the most recent previous command sent from that
device. This is commonly used when a WCM is set up to toggle individual channels. In this
case “last used” is used for the fade buttons so that the user can adjust the brightness of the
channel they have just turned on.
The action sections sets which command will be sent to the room and channel that have
been set.
RMR-VF
Manual Version 2.0.0
