Step 4
Place the circuit board on the
two screw on either side of the
metalwork.
Do not screw down at this stage
as the buzz bars need to be
accessible for Neutral/Earth
connections of lighting circuits.
Connect Live, Neutral, Earth for
board supply as indicated.
Step 5
Insert the daughtboards into the
slots on the motherboard.
Connect Neutral and Earth to
appropriate buzz bars in the
back of the casing
Make Live load connections to
the right hand 8 way terminal
block as shown.
NB
In this example 5 slots of the RAK6-MB
are used.
Step 6
Insert the RJ45 cable from the
RAK-LINK/RxLINK into the port
on the RAK and from there
another RJ45 cable to each
RAK in the “stack”.
Screw down the circuit board to
secure it to the case and fit lid
to complete installation
NB
The WDA-600 and WM-CUB will have
connections on the circuits boards
themselves which also need to be
connected.
RAK8-MB
Manual Version 2.1.5
