background image

Documentation Center

 CAUTION

If you ignore any of the following instructions, it can cause injury or damage to nearby products.

Prohibitions

Do not cover the vent. If the vent is covered, heat may build up inside the set and cause an accident.

1. Remove any dust buildup in the vent.
2. Do not place it on a shag carpet.
3. Do not cover the vent with a cloth, etc.

Instructions

Install in a stable place.

1. If you install the set in an unstable place, such as an unstable rack, it may fall and cause injury.
2. Do not install upside down or sideways. The set may drop and cause injury.

Instructions

Use the designated packaging materials for transportation. If you do not use the designated packaging materials,
the packaging material may be damaged by vibration during transportation and it may cause injury.

Instructions

Install based on the designated way of installation. If you do not follow the designated way of installation, the set
may drop due to the strength poverty and can cause injury.

Keep Dry

Do not touch with wet hands. If you touch the set with wet hands, it may cause an electric shock.

Instructions

Install other equipment or accessories properly. If you inadequately install other equipment or accessories sold
separately, they may fall and cause injury. When you install any of the following accessories, install it properly
based on this manual.

Instructions

Set up cables properly If your foot is caught by a cable, the set may fall and cause injury. Connect and install
cables carefully.

Instructions

Power off at a malfunction. If any malfunction happens, please turn off the power switch to shut down and remove
the power connector from the power connector terminal.

Prohibitions

Do not put anything, stand or sit on the set. If you put anything heavy on the set, it may damage the product.

Instructions

Follow the related laws or ordinances for disposal. When you dispose of this product, do not dispose of the product
as general waste.

Instructions

Summary of Contents for RAK9155












Reviews: