Documentation Center
Figure 34: New crated device listed in the DEVICES tab
4. To end the process, it is a good practice to review that the Application Key” is properly associated with this
device. The “Application Key” can be verified in the “KEYS(OTAA)” tab.
Figure 35: Application Key associated to the new device
📝
NOTE:
Standard OTAA mode requires the Device EUI, Application Key, and the Application EUI. But in
ChirpStack’s implementation, only Device EUI and the Application Key are mandatory. The Application EUI
is not required and is not recorded in the Application tab.
ABP Mode
Configure the ABP Mode on the Platform
During the registration of a new device, if “device_profile_abp” is selected, then the ChirpStack platform will
assume that this device will join the LoRaWAN network using the ABP mode.
1. Fill in the parameters requested as appears in Figure 36:
Device name and Device description: These are just descriptive texts.
