
Documentation Center
Assembling
As shown in Figure 2, the location for sensor slots is properly marked by silkscreen. Follow carefully the
procedure defined in
RAK5005-O module assembly/disassembly instructions
to attach a WisBlock module.
Once attached, carefully fix the module with three pieces of M1.2 x 3 mm screws.
Figure 2: RAK13009 assembly to WisBlock Base
Disassembling
The procedure in disassembling any type of WisBlock modules is the same.
1. First, remove the screws.
Figure 3: Removing screws from the WisBlock module
2. Once the screws are removed, check the silkscreen of the module to find the correct location where force can
be applied.
Figure 4: Detaching silkscreen on the WisBlock module
3. Apply force to the module at the position of the connector, as shown in Figure 5, to detach the module from the
base board.