RAK RAK13009, Quick Start Manual, Page: 1 / 15

Documentation Center
RAK13009 Quick Start Guide
Prerequisite
What Do You Need?
Before going through each and every step on using the RAK13009 WisBlock QWIIC, make sure to prepare the
necessary items listed below:
Hardware
RAK13009 WisBlock QWIIC
Your choice of WisBlock Base
Your choice of WisBlock Core
USB Cable
QWIIC-based 16x2 LCD
RAK19008 WisBlock IO Extension Cable(optional)
Li-Ion/LiPo battery (optional)
Solar charger (optional)
Software
Download and install the Arduino IDE .
To add the RAKwireless Core boards on your Arduino Boards Manager, install the RAKwireless Arduino BSP
.
Product Configuration
Hardware Setup
The RAK13009 is a QWIIC module, which is part of the RAKWireless WisBlock Interface series. This module has
two connectors: one for the WisBlock sensor and then for the standard QWIIC interface. For more information
about RAK13009, refer to the
Datasheet .
The RAK13009 WisBlock QWIIC can be mounted on any Sensor slot of the WisBlock Base board, as shown in
Figure 1. Also, always secure the connection of the WisBlock module by using compatible screws.
Figure 1: RAK13009 Connection to WisBlock Base
Assembling and Disassembling of WisBlock Modules