Documentation Center
📝
NOTE:
“XXXX” is the last 2 bytes of your RAK7244’s WiFi MAC address. Connect to this Wi-Fi SSID using the
password provided below. Take note also of the default IP address of the gateway provided below as this
will be needed in connecting via SSH.
Wi-Fi Password: rakwireless
Default IP Address:
192.168.230.1
Raspberry Pi 4 Ethernet Port
You can also connect your PC with the gateway through an Ethernet cable. By default, the IP address of the
gGateway’s Ethernet interface is
192.168.10.10
, so you need to set the IP address of your PC’s Ethernet to the
same network segment, for example,
192.168.10.20
.
To do this in Windows, go to Control Panel -> Network and Internet -> Network and Sharing Center and Click
Ethernet.
Figure 3: Network and Sharing Center
Click Properties then Choose Internet Protocol Version 4 (TCP/IPv4).
