4. Deploying a BreadCrumb Mesh Network
There are many factors which need to be taken into account when deploying a BreadCrumb mesh net-
work. This chapter describes the addressing scheme of the mesh, channel assignments and some of the
most commonly occurring environmental factors that will have a major impact on the performance of
the mesh. The final section details guidelines and methodology needed to follow when deploying the
mesh.
For information on physical installation, grounding waterproofing connections, see
Installation Guide-
lines
and the Appendix
Technical Bulletins
.
4.1 Addressing
When in gateway mode or when using its own embedded DHCP servers, the BreadCrumb mesh requires
that wireless devices use IPv4 addresses in the Class A network 10.0.0.0/8 (that is, any address that be-
gins with ‘10.’). If you are not connected to another network, or if you are bridging to one rather than
routing to it, your wireless client devices may have any address whatsoever.
Note
Note
Any computers running the BC|Commander management application must have an address in the
Any computers running the BC|Commander management application must have an address in the
same range as the BreadCrumbs they manage. Refer to the BC|Commander Version 11 User Guide doc-
same range as the BreadCrumbs they manage. Refer to the BC|Commander Version 11 User Guide doc-
ument for the details of the BreadCrumb IP address configuration.
ument for the details of the BreadCrumb IP address configuration.
4.1.1 BreadCrumb Device Addresses
Each BreadCrumb radio has one IPv4 address in the Class A network 10.0.0.0/8. Rajant ensures during
manufacturing that the default addresses are not duplicated between any two BreadCrumb devices. Ad-
dresses assigned to BreadCrumb devices can be viewed using BC|Commander. They can be configured
manually, or set to DHCP.
4.1.2 DHCP
Each BreadCrumb device includes an embedded DHCP server. You may safely enable the DHCP servers of
multiple BreadCrumb devices simultaneously. Address conflicts among DHCP clients are prevented by
using the unique BreadCrumb device addresses assigned at the factory as a base.
A BreadCrumb device determines its DHCP range as follows:
• Start with the first three bytes of the BreadCrumb’s IPv4 address.
• Add a low-byte range of 10 to 210.
4.2 Channel Assignments
BreadCrumb radios have default channels assigned, based on the frequency and type of the radio. See
the following table for a list of radio frequencies and their default channel assignments. When more than
one radio of the same frequency is present, there may be default channels for the additional radio(s).
This table includes radios that may be found in different BreadCrumb models, not one specific model.
Table: Default Channel Assignments
Radio Card Frequency and Type
Default Channel
Second Default
Third Default
900 MHz 802.11g
5
2.4 GHz 802.11n
11
1
2.4 GHz 802.11g
11
1
4.8 GHz 802.11a
164
184
174
Summary of Contents for BreadCrumb ES1
