Raisecom Technology Co., Ltd.
5.3. Full Duplex Configuration (RJ45 Port)
5.3.1. RC315/RC316-FE
Series
RJ45 Interface Auto-negotiation
When the RJ45 interface of RC315/RC316 media converter is configured to
“auto-negotiation”, the copper port/RJ45 of other network equipment must also be
configured to “auto-negotiation” to ensure normal data transmission. If other equipment is
working in forced status of full duplex mode, the media converters shall be fixed to “Full
Duplex Mode”.
5.3.2. RC315/RC316-FE Series RJ45 in Forced Status
When RC315/RC316 series media converter is working in forced status, the RJ45 duplex
mode configuration of other network equipment must complies with the following table, to
ensure proper data transmission.
Media Converter
RJ45 Mode
Other Equipment
RJ45 Mode
100M/Full Duplex
100M/Full Duplex
100M/Half Duplex
100M/Half Duplex
10M/Full Duplex
10M/Full Duplex
10M/Half Duplex
10M/Half Duplex
5.4. Connection with Other Equipment (at Optical Port)
Several mandatory conditions are required:
1. The same bit rate
2. Matched optical power
3. Fast Ethernet protocol (IEEE 802.3u Fast Ethernet)
8
