background image

                                              

Raisecom Technology Co., Ltd 

 

 

 
 

1

1. Cautions 

Please read the following notices carefully before installing and using 
the device, Raisecom does not respond to any loss that caused by 
violating safety notices.

 

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

There must be grounding protection for the 
sake of safety; the installing, maintaining and 
plugging/pulling must be operated by technical 
staff following in steps of anti static. 

There are high sensitivity optical fittings inside 
the device, so the power of network device’s 
optical output interface must be checked before 
connecting. To avoid damaging, it is not allowed 
that the optical power of network device’s 
output interface is higher than that of 
OPCOM3100.

 

OPCOM3100 is integrated device that has 
precise elements, please avoid violent shakes 
and impacts, and do not disassemble or 
maintain the device yourself, we regard it as 
you waiver your rights of repair guarantee.

 

OPCOM3100 must be installed in the equipment 
center where temperature and humidity are 
proper, and please be attention to the electric 
features of surrounding devices.     

Summary of Contents for OPCOM3100-155



























Reviews: