Pro3 Series
3D Printer
/ User Manual
Do not stand or climb on the printer.
WARNING ‒ Choking Hazard!
Keep small parts away from children.
Do not let children play with small parts.
This machine contains many small parts and pieces. Do not allow children to
breathe in or swallow small parts.
CAUTION ‒ Risk of injury!
The printer’s lid is not designed to support weight and will likely break if stood
on.
A.
Safety
Wait for the three-axis system to come to a complete stop before reaching
inside.
WARNING ‒ Risk of scalding!
Do not touch the edge of the spatula.
Keep children away from the spatula.
The spatula provided in the accessory box has a sharp edge. If the spatula is
incorrectly used the user may be injured.
Do not touch the shell of the printer when it is hot.
Keep children away from the printer when it is hot.
When operating or printing at high temperatures, the shell of the printer
becomes hot.
Do not touch the print bed when it is hot.
Please operate with the heat-resistant gloves in the attachments box.
Keep children away from the print bed when it is hot.
When operating or printing at high temperatures, the print bed becomes hot.
Some parts in the printer are sharp and may cause injury.
To avoid injury, refer to the operational guide when removing printed parts from
the build pate.
WARNING ‒ Risk of burns!
Do not touch the hot end when it is hot.
Please operate with the heat-resistant gloves in the attachments box.
Keep children away from the hot end when it is hot.
When operating or printing at high temperatures, the hot end becomes hot.
Do not sit on or lean against the printer door.
Do not place any objects on the printer door.
The appliance may tip over if you sit on or lean against the open door.
Reaching into the chamber while the three-axis system is still moving may cause
hand injuries.
05
