Pro3 Series
3D Printer
/ User Manual
J.
Dual Extruder Printing - Loading
Locate the open end of the filament,
and feed it through the guide tube.
NOTE:
The operation of the left extrud-
er is the same as that of the right
extruder. Here we take the left extruder
as an example.
1
After loading both sides of extruders,
press the "Utilities" tab on the bottom
of the screen, and set the temperature
of the left nozzle to match the require-
ments of the filament that you are
using.
Press the "Load" button, and the printer
will begin to heat. When the target
temperature is reached, press "Load".
Complete the feeding operation
according to the instructions on the
screen.
NOTE:
This document's instructions are
based on the properties of Raise3D PLA
filament. This is the standard filament
included with your product and it is
advised to use Raise3D PLA for testing
and initial setup.
2
26