3D PRINTER MANUAL
-
RAISE3D PRO2 SERIES
-
14-
www.raise3d.com
Once the unit has been powered, the printer will go
through a start-up sequence. Your Raise3D printer
will take approximately 60 seconds to boot up. When
the touchscreen displays the "Home" screen, the
printer is ready.
Open the "Utilities" tab, and press the Z Homing
button.
OK the request, and the print bed will begin to
“home” or move to the origin position. This will also
allow you to access your accessory packages.
Open the front door, and remove the starter box and
filament box from the base of the printer.
Open these packages, and compare with the
following contents list.
Lower the Z platform by 50mm.
To do this, set the interval at "10mm" by selecting it
in the "Move Steps" bar. This will move the bed
10mm per arrow click. Click this downward arrow 5
times to move Z platform downward to 50mm
.
