Raise3D E2 User Manual Download Page 6

Page: 6 / 80

RaiseTouch User Manual Date:03/03/2020

- 6 / 80 -

www.raise3d.com

Height

: The height of the completed model.

Press

icon in the “

Home

” tab to switch the displayed information from completion percentage

based on total layers and layer count.

Height

1.2 Tune

The Tune interface shows the parameters associated with the movement of the printer. Including:

Tune

L-Nozzle temperature:

The temperature of the left nozzle.

R-Nozzle temperature:

The temperature of the right nozzle.

Heatbed temperature:

The temperature of the heat bed.

Feed rate:

Speed factor override percentage.

Fan speed

: The speed of the fan which in controlled slot.

Note:

Only the right lower fan on single-extruder machine can be controlled.

L-Nozzle flow rat

e: The flow rate of the left nozzle.

R-Nozzle flow rate:

The flow rate of the right nozzle.

Summary of Contents for E2

















































































Search results

Summary of Contents for E2

Reviews:

Related manuals for E2

Brands by name

Popular brands

Raise3D E2, User Manual

Search results

Summary of Contents for E2

Reviews:

Related manuals for E2

Brands by name

Popular brands