RaiseTouch User Manual Date:03/03/2020
- 44 / 80 -
www.raise3d.com
(7) Turn on filament sensor
In this function, the detection sensor will be activated, and the printing will be suspended after the
shortage of filaments is detected, and the following window will appear:
Fractured Filament Detected
(8) Lift nozzle to specified Z axis height after printing stops
As the print is stopped, the nozzle will be lifted to the specified Z axis height.
(9) Lift nozzle to specified Z axis height upon completion of printing.
As the print is completed, the nozzle will be lifted to the specified z axis height.
(10) Load/Unload Timeout
Turn on the
Load/Unload Timeout
, If the Load/Unload continues, the printer will automatically stop
the Load/Unload after the specified timeout. The
Load/Unload Timeout
setting is closed by default.
The default time after opening is 10 minutes.
Load/Unload Timeout
(11) Raise the Z-axis after resuming from a power loss or pausing a print
Lift Z axis 2 mm during power loss, pause and printing restart to prevent scraping down model.
(12) Raise the Z-axis to a defined position after a print is paused
After this function is turned on, when the print is suspended, the printer will lift the Z axis to the
specified position to facilitate the load/unload or picking up parts.
