RAIS VISIO 3 Series Installation Manual Download Page 45

Page: 45 / 108

INSTALLATION MANUAL

Start-up: Control box, power supply, receiver and remote control

The following electrical parts accompany this gas fireplace:

Connection of control box for LED light

The control box is positioned behind the inspection
hatch.

The grey control box must be connected to the
power supply, as shown in the image.

Connection of receiver

The wide yellow/blue/ green connector on the
control box must be inserted in the receiver, as
shown in the image.

NB:

If there is a power failure, four AA batteries can

be fitted in the receiver. If batteries are used in the
receiver, the LED light and MyFire wi-fi-box will not
operate.

NB!

The power supply (12 V adapter) may

not

be directly connected to the receiver, otherwise this

could lead to overheating and functional failure.

Control box for LED

light

Remote control

Power supply/adapter

Receiver

GB - 45

Summary of Contents for VISIO 3 Series













































































































Search results

Summary of Contents for VISIO 3 Series

Reviews:

Related manuals for VISIO 3 Series

Brands by name

Popular brands

RAIS VISIO 3 Series, Installation Manual

Search results

Summary of Contents for VISIO 3 Series

Reviews:

Related manuals for VISIO 3 Series

Brands by name

Popular brands