RAIS attika Q-BE INSERT, User Manual

Page: 71 / 224

15
English RAIS/
attika
- User Manual Q-BE INSERT
Automatic regulation of combustion air (CleverAIR™)
This stove is equipped with an independent and self-regulating air damper.
Hence there is no damper handle. You need only to add the dry wood and light it.
The rest is done by CleverAIR™ technology.
Primary air is the combustion air added to the primary combustion zone at the bottom
of the combustion chamber, i.e. the bed of glowing embers. This cold air is only used in the
lighting stage.
Secondary air is the air, added to the gas combustion zone, meaning air, which contributes to
the combustion of the pyrolysis gasses (preheated air, used for cleaning the glass and combus-
tion).
This air is sucked through the damper below the burning chamber and is pre-heated through
the side channels and then emitted as
hot scavenging air onto the glass. The hot air rinses the glass and keeps it soot-free.
Tertiary air at the back of the burning chamber at the top (2 rows of holes) ensures the combus-
tion of
the final gas residues before leaving through the chimney.
The pilot nozzles are located at the bottom of both the back plate and the front of the firebox.
They
ensure that the bed of glowing embers is fed with air and therefore holds a high temperature.
This allows a quick start
when fueling and reduces the risk of the fire extinguishing.
CleverAIR™ ensures an optimal air mixture and a clean combustion at any combustion stage.
The bi-metal combustion control system is automated and excludes the incorrect operation.
Ventilation
There must not be an extractor fan fitted in the same room as the stove as this can cause the
stove to emit smoke and fumes into the room.
The stove requires a permanent and adequate air supply in order for it to operate safely
and efficiently. The installer may have fitted a permanent air supply vent into the room in which
the stove is installed to provide combustion
air.
This air vent should not under any circumstances be shut off or sealed.