RAIS/attika Q-Tee II C GAS, User Manual

Page: 193 / 596

47
PROGRAM MODE
ON:
Press the button
1
or
2
,
ON
or
OFF
is displayed.
NB! The temperature set for Thermostatic mode is
the temperature for the operating time in Program
mode. If the time set for Thermostatic mode is
changed, the temperature for the operating time in
Program mode also changes.
OFF:
1. Press on the or or
button to enter Manual
mode.
2. Press on the button to
enter Thermostatic mode.
Default setting:
OPERATING TIME (thermostatic mode) TEMPERA-
TURE: 21 °C (70 °F)
TEMPERATURE FOR TURNING OFF ”--” (only pilot
light)
SETTING THE TEMPERA-
TURE:
1. Press the button and
hold it down until flash-
es. ON and the temperature
set (setting in Thermostatic
mode) are displayed.
2. Continue by pressing the
button or waiting. , OFF
is displayed and temperature
flashes.
3. Select temperature
at which to shut down
by pressing on the or
button.
4. This is confirmed by press-
ing on the button.
NB!
The temperature set (Thermostatic mode) and
temperature for shutting down are the same for each
day.
SETTING THE DAY:
5. ALL flashes. Press the
or button to select
from ALL , SA:SU , 1 , 2 , 3 , 4 ,
5 , 6 , 7 .
6. This is confirmed by press-
ing on the button.
SETTING TIME FOR TURN-
ING OFF
(PROGRAM 1):
12. , 1 , OFF is displayed,
ALL is displayed briefly and
HOUR flashes.
13. Select hour by pressing
on the or button.
14. This is confirmed by
pressing on the button. ,
1 , OFF is displayed, ALL is
displayed briefly and Min-
utes flashes.
15. Select minutes by press-
ing on the or button.
16. This is confirmed by
pressing on the button.
NB!
Either continue to PROGRAM 2 and set oper-
ating time and time for shutting down or stop pro-
gramming here. PROGRAM 2 remains deactivated.
NB! PROGRAMS 1 and 2 use the same operating
temperature (Thermostatic mode) and temperature
for shutting down for ALL, SA:SU and Daily Timer (1,
2, 3, 4, 5, 6, 7) When a new operating temperature
(Thermostatic mode) and temperature for shutting
down have been set, this temperature will become
the new default setting.
NB! If ALL, SA:SU or Daily Timer are programmed for
operating temperature and temperature for shutting
down for PROGRAM 1 and PROGRAM 2, these will
become the new default times. The batteries must
be removed to clear temperatures, operating times
and times for shutting down for PROGRAM 1 and
PROGRAM 2.
SETTING OPERATING TIME
(PROGRAM 1):
7. ,
1, ON
is displayed,
ALL
is displayed briefly and
HOUR
flashes.
8. Select hour by pressing on
the or button.
9. This is confirmed by press-
ing on the button.
,
1
,
ON
is displayed,
ALL
is displayed briefly and
Minutes
flashes.
10. Select minutes by press-
ing on the or button.
11. This is confirmed by
pressing on the button.
ALL is selected.
English RAIS/
attika
- User manual for Q-Tee II Gas / Q-Tee II C Gas