NOTE:
TIPS FOR WATER PUMP
Once the device is plugged in, the power light will turn red.
Press the power button to turn it on, and the power light will turn green.
Press the power button to turn it off completely
(it will not turn on automatically), and the power light will turn red.
The light board only contains the spectrum that is effective for plant
photosynthesis, it is a full-spectrum LED plant light. And it has a built-in
timer for the Grow Light that automatically provides your plants with “sunlight”
(16 hours per day). Depending on the plant, you can choose between 2 LED
spectrum modes: Vegetables Mode or Flowers & Fruits Mode.
The device has a memory function, and the current state will be memorized
after 3 seconds of any button operation, and it will be restored when the
power is turned off and restarted.
The 30-minute on/30-minute off cycle mode of the water pump can provide
sufficient oxygen to the plant roots.
When the water pump is running loudly, please fill the water tank in time.
After the device is turned on, the water pump will automatically run a 30-minute
on/30-minute off cycle. When the water pump is running, the water button
light is blue.If the water pump is running, press the water button to deactivate
it for 10 hours (the light is green when the pump is at rest). It will then
automatically resume the 30-minute on/30-minute off cycle. Press the water
button again to turn the water pump back on.
Press the power button to turn it off completely (it will not turn on automatically).
Power:
WATER PUMP:
2 LED LIGHT MODES:
CONTROL PANEL SETTINGS
12
