RainMaker FLUIDLOGIC, Installation Instructions Manual, Page: 6 / 36

INSTALLATION INSTRUCTIONS • 5
Using a 5/16” socket or driver, tighten the Hose
Clamp around the bar and securely mount the
Pod inside the vehicle.
Locate the 1/4” Fluid Line.
7
8
9
Disconnect the CPC Connectors and take note
of the male and female connectors and unwind
the Fluid Line.
Connect the female connector to the inlet side
of the Pod.
Once connected run the Fluid Line towards the
fluid reservoir.
11
Give the line plenty of slack to assure that once
connected to the fluid reservoir there is no
restrictions. Measure twice!
12
13