12
(H)
Parts List
(I) Limited 5 Year Warranty
Envirogard system housings are warranted, to the original Consumer, purchaser/owner, for a period of five (5) years, from the date of purchase, against
defects in materials or workmanship. O-rings, faucet and installation fittings are warranted for a period of one (1) year from the original date of
consumer purchase. The Company's obligation under this warranty shall consist of repair, replacement or credit, at its option, of any part found by the
Company inspection to be defective, provided that the product has not been misused, abused, altered or damaged as determined by the Company and
provided that only approved Enivrogard/Rainfresh replacement cartridges have been used in the housings. This warranty does NOT apply to the
replacement cartridge(s) which by nature will diminish in performance through normal use and require(s) regular replacement. This warranty does NOT
cover, and is intended to exclude, any liability on the part of Envirogard for any incidental damages, consequential damages, labour charges or any
other costs incurred in connection with the purchase, installation, use, maintenance or repair of the water filter whether under this warranty or any other
warranty implied by law. Some provinces/states do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from province to province/state to
state. This warranty applies only to water fi litres/systems purchased in Canada or the U.S.A.
ENVIROGARD PRODUCTS LIMITED
446 MAJOR MACKENZIE DRIVE EAST, RICHMOND HILL, ON L4C 1J2, CANADA
TEL :
(905) 884 9388
HELPLINE:
1800 667 8072
WEB:
www.rainfresh.ca
© COPYRIGHT • ENVIROGARD PRODUCTS LIMITED 2019 • ALL RIGHTS RESERVED
PART #
ITEM
QTY
HP1
1 micron sediment pre-filter
1
CF2
5 micron activated carbon block pre-filter
1
IM200
Granular inline carbon post-filter
1
ROM50
Reverse Osmosis membrane 50 GPD
1
520
Sump for filter housing
2
1008-1
Self-piercing supply valve for copper pipe
1
1008-3
¼” Delrin compression sleeve
2
1011-0
Bracket mounting screws
2
1030-15
¼” compression nut
2
1603
¼” tube insert
2
2501
Filter housing head, 3/8”, white
2
2502
Head O-ring
2
2505
Vent pin assembly
2
2508
Head cover plate – no hole
2
2640
Air gap faucet assembly, complete
1
2601
Membrane housing
1
2602
RO Base clip
2
2605
Post-filter double clip
2
2606
3/8” MPT x ¼” quick connect fitting
2
2607
Automatic shut-off valve
1
2609
1/8” MPT x ¼” quick connect fitting
2
2610
Permeate fitting with check valve
1
2611-1
Drain line flow control
1
2612
Union Tee, ¼” quick connect
1
2616
Storage tank (3.2 Gal) with base
1
2617
Tank ball valve, ¼” FPT x ¼” QC
1
2618
Drain saddle connector
1
N
o
v
2019
