2
2. PHYSICAL CHARACTERISTICS
• Inlet connection: 1”
• Outlet connection: 1”
• Water hammer check valve
• Dry-running protection system
• Pressure gauge
• Manual start button (Reset)
• Power supply LED (Power)
• Pump switch-on LED (On)
• Safety system activation LED (Failure)
3. INSTALLATION
Note
: This device must be assembled and installed by a qualified elec
-
trician in accordance with local laws. Install a GFCI grounded circuit.
Handle with care. Impact can damage the product. Before installation,
make sure the unit shows no visible signs of damage.
Water Connection
The PC115A features an internal check valve and must be installed
with the arrows pointing upward, connecting the 1” threaded inlet to
the pump’s outlet and the 1” threaded outlet to the point of use with
the water inlet facing downward and the output above.
Before starting up the unit, fill the suction inlet with water as
specified in the pump’s manual.
