RainbowAstro Hubo-I RST-135 User Manual Download Page 31

Page: 31 / 98

Edit mode is automatically entered if you need to enter a value. Alternatively, after
selecting the menu to change the setting value, press and hold the

ENT.

key to enter.

How to use

How to use in edit mode is as follows.

Table 2-15 How to use in edit mode

Key

Explanation

▲, ▼, ◀, ▶ key

Move the cursor.

ESC

key

Cancels the input and exits Edit mode.

ENT.

Key

Saves the input and exits Edit mode.

Number key

Input a number.

* -

key,

# +

key

Input +, -.

Screen Layout

The screen of edit mode and each item are as follows.

Drawing 2-14 Edit mode screen

Table 2-16 Explanation of each item on the screen (edit mode)

Items

Explanation

Displays the position of the cursor.

Blinks in Edit mode, where information can be
modified.

#014/01/16 GMT+09.0

19:17:44

Summary of Contents for Hubo-I RST-135



































































































Search results

Summary of Contents for Hubo-I RST-135

Reviews:

Related manuals for Hubo-I RST-135

Brands by name

Popular brands

RainbowAstro Hubo-I RST-135, User Manual

Search results

Summary of Contents for Hubo-I RST-135

Reviews:

Related manuals for Hubo-I RST-135

Brands by name

Popular brands