RainbowAstro Hubo-I RST-135 User Manual Download Page 96

Page: 96 / 98

Firmware update

Users can update the firmware through our homepage (http://www.rainbowastro.com).

direction

RainbowAstro is constantly providing firmware updates to enhance
the program's completeness and add user-friendly features.

To update the firmware:

Download the firmware downloader and the latest firmware from our website
(http://www.rainbowastro.com).

Use a USB cable to connect the mount to the PC.

Power on the mount while pressing

NEXT

key and

PREV

key.

The GPS LED and Tracking LED of the mount blink at the same time and

Download Mode

is displayed on the display window.

Run the downloaded HUBOi_Firmware_Downloader.exe.

Select

COM Port

and check

Baud Rate

. The Baud Rate is 115200.

direction

For details on the communication port (COM), refer to 'Connect with
PC' (p.97).

Click the

Connect

button.

Summary of Contents for Hubo-I RST-135



































































































Search results

Summary of Contents for Hubo-I RST-135

Reviews:

Related manuals for Hubo-I RST-135

Brands by name

Popular brands

RainbowAstro Hubo-I RST-135, User Manual

Search results

Summary of Contents for Hubo-I RST-135

Reviews:

Related manuals for Hubo-I RST-135

Brands by name

Popular brands