6
Tweeter-installation
Surface-Mount Installation with Angle Mount Cup (illustration 2)
Places of installation:
Mirror corner, dashboard and rear package shelf
•
Put the angle mount cup (
O
) on the installation place, scribe and finish the cable holes and mark the drilling
holes for the screws. Drill holes
∅
3,5 mm for the angle mount cup screws and
∅
8 mm for the Tweeter
screws.
•
Fasten the angle mount cup (
O
) with the provided screw 3,9 x 13 (
R
).
•
Insert the tweeter (
J
) into the angle mount cup (
O
) and pull the cables through the appropriate holes.
•
Adjust the tweeter (
J
) to the cable holes in the angle mount cup (
O
). Press together and screw down carefully
only with the screw M4 x 6 (
P
) and the washer M4 (
T
).
Caution!
Do not tighten too firmly!
•
Connect the tweeter according to the planned mode of operation active / passive with amplifier or crossover
and adjust the level (Page
16
and
18
).
Picture 7:
Angle Mount Cup for CAL 25.
illustration 2
