Rainbow CS 275.28 Platinum active Installation Manual Download Page 4

 

Attention: Important Operational Information. Please Read Before Installation. 

 

  The loudspeaker may be operated only with the system-synchronized crossover and under observance of the 

specified rated output power. 

 

Interchanging the woofer and tweeter connections will lead to immediate destruction of the tweeter. 

 

Beginning operation without the crossover, for example with an active crossover or non-system crossover, may 
result in damage to the loudspeaker. 

  When connecting the loudspeaker, crossover, and amplifier it is absolutely necessary to employ the same 

polarity. Interchanging the polarity produces an unnatural sound lacking bass reproduction. 

  The component systems are acoustically synchronized as one unit. Supplementation through an auxiliary 

loudspeaker or trade out with a larger woofer is not possible as this would change the overall frequency 
response or impedance of the system. An overload of the crossover or a single loudspeaker would then be 
unavoidable. 

 

The opening of the crossover for the purpose of altering the parts or function is considered foreign interference 
and grounds for termination of the warranty  

  For the purpose of technical safety, the loudspeaker should only be attached with the included self-tapping 

screws. We accept no liability for use of alternative methods of attachment. 

 
 

Contents and Detail of Parts 

 

Fastening for Woofer:

 

 
2 pieces 

grill 175 mm 

 metal, grey with Rainbow logo 

  

2 pieces 

woofer 175 mm 

  

  

8 pieces 

self-tapping screw 4.0 x 30 V2A stainless steel Pan Head 

  

8 pieces 

washer M4 V2A stainless steel 

  

8 pieces 

screw M4.0 x 30 V2A stainless steel 

  

pieces nut 

M4 

stainless 

steel 

         D 

pices 

 self-locking 

nut 

M4 

stainless 

steel 

       E 

 

Fastening for Tweeter:

 

 
2 pieces 

CAL 28 Platinum (volume silk dome tweeter with neodymium motor) 

  

2 pieces 

angle mount 

 

  

2 pieces 

threaded bolt 

M4 to M5 

  

pieces clamp 

rings 

          R 

pieces set 

screws 

          S 

pieces nut 

M5 

           T 

pieces screw 

M4.0 

          U 

pieces washer 

M4 

stainless 

steel 

        V 

pices 

 washer 

M5 

stainless 

steel 

        W 

1 piece   

allen wrench 1,5 

 

Fastening for Crossover: 

 
2 pieces 

crossover 

 

  

6 pieces 

self-tapping screw 

3.9 x 32 DIN 7982 

  

1 piece   

allen wrench 2,0 

1 piece   

allen wrench 4,0 

 

Miscellaneous: 

 
1 piece 

installation manual 

Summary of Contents for CS 275.28 Platinum active

















Reviews: