10
Installing and Attaching the Tweeter
Installation Location:
Door Installation (front/rear), rear installation, side view mirror area installation,
instrument panel installation, and rear windshield deck installation
•
Fix the installation template of the tweeters at the selected location with tape and, along the indicated line,
carefully cut and smooth edges.
•
For an U-bracket (K) installation special threaded bolts M4 on M5 (Q) are included with the system. Screw the
M4-side of the mounting bolts to the tweeter. The appropriate bolt hole M4 is located in the base of the
tweeters. Loosely tighten the screw mountings with the an allen wrench. Afterwards screw the tweeter onto the
mount with hexagonal nut M5 (T) and using the washer M5 (W).
Clamp ring flush mount installation:
•
Place tweeter (J) in the prepared opening and put clamp ring ® from the back over the tweeter housing. Use the
three set screws (S) to fix the tweeter by turning them in with the provided allen wrench (see figure 3).
Angle mount installation:
•
Turn in threaded bolt (Q) on back side of the tweeter. Place tweeter (J) through angle mount (M) in the
prepared opening and put U-bracket (K) onto the threaded bolt. Use washer (W) and screw nut (T) to fix
tweeter (see figure 4).
U-bracket flush mount installation:
•
Turn in threaded bolt (Q) on back side of the tweeter. Place tweeter (J) in the prepared opening and put U-
bracket (K) onto the threaded bolt. Use washer (W) screw nut (T) to fix tweeter (see figure 5).
Figure 3: Clamp ring flush mount installation.
Figure 4: Angle mount installation
Figure 5: U-bracket flush mount installation
Note:
Use only the enclosed threaded bolts for the U-bracket attachment method. Use of incorrect or overly
long screws can damage the tweeters.