R a i n b o w C o l o u r C h a n g e r s G m b H
An der Talle 26-28
D-33102 Paderborn
Tel: +49 5251 14092 28
Fax: +49 5251 14092 90
E-mail: [email protected]
Homepage: www.rainbow-colour-changers.de
6
Depending on the number of single frames, you have to tension the right roll:
For 6“, 8“ and 12“ PRO Colour Changer:
2 – 21 colours = 6 full turns
21 – 25 colours = 7 full turns (for the 12“ PRO)
21 – 33 colours = 7 full turns
For 15“ and 8-Lite PRO Colour Changer:
11 – 16 colours = 18 full turns
17 – 20 colours = 20 full turns
21 – 25 colours = 20 full turns
Tension the right roll by turning it anti-clock-wise. After the correct quantity of full turns hold the roll (the slot has to face up) and fix the
colour string by attaching the gel attachment pin into the slot of the right roll. Release the roll carefully and check with the help of rolling
forward and back with the following keys
*+
the correct guide of the colour string. Now fix the edges of the gel string with the heat
resistant tape.
The automatic pre-calibration and the pre-run of the colour string follows at this point. This is necessary for a precise rolling-up, because the
Colour Changer automatically calculates the number of colour frames.
Step
Key/Sequence
Action
Display
(?- for individual value)
Display/Action
(
,
Press
%'#
Flashing
(
,
Press
Pre-calibration is running
(
End of pre-calibration
%#()%#(
Counts pre-run 1-15 (F)
,
Press
%#(.
Early interruption of the pre-runs
(possible from the 6. pre-run)
(
End of pre-run
Calibration is running
End of calibration
)..)
Amount of the colour frames
+
Press (if the calculated number of
colour frames is wrong)
)..)
Reduces the amount of colours
(max. 2 possible)
*
Press (if the calculated number of
colour frames is wrong)
)..)
Raises the amount of colours
(max. 2 possible)
(
,
Press
)..)
Confirm
(...
Level display of the colour channel
(
Start address
End of the loading procedure
