Rain Bird WS PRO LT, Installation Manual

Page: 5 / 14

WS PRO LT weather station 4
Weather Station Setup
1. Remove the top foam packing from the box and verify you have all ordered equipment (see Equipment
List).
Report missing or damaged equipment to your local Rain Bird distributor before installing your
system.
Equipment List
Models Direct
Connect
Direct
Connect
Solar
Powered
Wireless Wireless
Solar
Powered
Wireless
2.4 GHz
Solar
Powered
1. WS PRO LT Weather
Station X X X X X
2. RS-232, serial
communications cable (9-
pin to 9-pin) X X X X X
3. Two keys X X X X X
4. RF 400-series Spread
Spectrum Radio X X
5. RF415-series Spread
Spectrum Radio X
6. Antenna X X X (whip
antenna)
7. RFXXX AC Adapter X X X
8. Solar Panel X X X
9. Solar Panel Mounting
Hardware X X X
10. RAD Modem for
computer X X
11. RAD modem (in white
box) for weather station X X
12. Cable for connection
between weather station
and RAD modem at
weather station X X
13. Cable for connection
between RAD modem at
weather station and MSP-
1 (9720) X X
2. Use the lift straps to remove the weather station, since removing the station by lifting on the sensors
may damage the sensors (see Figure 2)