Rain Bird The Freedom System for Maxicom, Instruction Manual

Page: 28 / 46

22 22 22 22 22 22
Command name Format Description Examples
Command 76
Resume a paused schedule
##76#SSSS##
Resumes an interrupted schedule.
##76#15##
Resumes schedule 15. If you omit SSSS, all
paused schedules resume, therefore ##76##
resumes all paused schedules.
Command 8
Hang up on the current
##8##
Hangs up on the site currently
##8##
site and begin the on-line. Enables user to enter a Site currently on-line is disconnected; user
command sequence with new site without re-entering enters new site for contact without re-entering
another site. a password. a password.
Command 9
Stay on-line with the
##9##
Allows Maxicom 2 to stay on-line
##9##
current site after the phone with the current site after the user Allows the user to send commands to a site,
is hung up hangs up. Maxicom 2 stays on-line move to a different location in the same site,
with the site until the remote user then send more commands. For example, if
contacts it again, or until 30 you send commands to site 8, but need to
minutes pass, whichever comes check another part of the site before
first. During this time, all completing the commands to site 8, enter
passwords are locked out. ##9##, wait for the OK beep, then enter #
and hang up. You have 30 minutes to contact
Maxicom
2 again. At the other site, call
Maxicom
2
and enter your password. You will
hear the OK beep meaning you are on-line.
You can now enter commands.
If you hear the error beep followed by a busy
signal, the window is closed. Someone at
Maxicom
2 may have terminated your Freedom
contact. To determine your contact status, enter
your password and then enter
##
. If you hear
one beep, you are off-line; if you hear two
beeps, you are on-line. If Maxicom
2
has hung
up, contact the site in a normal way.
22