Rain Bird The Freedom System for Maxicom, Instruction Manual

Page: 23 / 46

3
Using the Freedom System
17
To turn off access for a specific time period:
Press ##4321#2#(1 – 9)##
You have closed access to the system for a specific period (1 – 9 hours,
depending upon your selection).
Contacting the Freedom System by telephone
1.
Dial the Freedom System telephone number.
2.
Wait until you hear the Freedom System answer.
3.
Enter ##XXXX#1#tt## (XXXX = password)
Enter a time (tt) only if you desire an access time other than the eight-hour
default access time.
4.
Enter
##71#SCHD##
(71 = turn on a specific schedule; SCHD = the number
of the specific schedule you want to start). You can enter as many schedules
as you wish.
Example:
Access the Freedom System with password 4321 for a period of two
hours and then turn on schedule 112 and schedule 23.
a. Dial the Freedom System telephone number.
b. Wait until you hear the Freedom System answer.
c. Enter
##4321#1#2##
Access to the system is turned on with the password 4321 for
two hours.
d. Enter ##71#112##
Schedule 112 is turned on.
e. Enter
##71#23##
Schedule 23 is turned on.
You can enter any other commands to the Freedom System via telephone in
the same manner.
Accessing a typical site with the Freedom System
After you have initialized the Freedom System in Maxicom
2
, you may access a site.
This section describes a step-by-step access of a typical site. For a detailed descrip-
tion of the available commands, see “Summary of Freedom System commands” on
pg. 19.
1.
Dial the phone number for the Maxicom
2
system Freedom modem.
When the Freedom modem answers, you will hear one short beep.
2.
Enter your password. For example, if your password is “1111,” you would
enter
##1111## .
• If you enter a valid password, you will hear the OK beep (four short beeps)
and then you are ready to move to the next command.
• If you enter an invalid password, you will hear the error beep (one long
beep). If you hear the error beep, reenter your password until you hear the
OK beep.