SMRT-Y Soil Moisture Sensor
4
Preparation
1.
Ensure that the property has been irrigated within the past 12 hours. This will make digging easier and
lessen the likelihood of turf root damage.
2.
Review each irrigation zone and identify the primary plantings (turf, shrubs, flowers, etc.). Record zone
type (drip, vs. sprinkler) and where it is located on the property. For the turf zones, record whether the
zone is full sun, partial sun or shade. Finally, record each zone’s current controller settings.
3.
Ensure each zone operates properly.
4.
Choose a full sun turf zone for the sensor installation (see Figure 1 & 2).
5.
From the homeowner or maintenance contractor, determine and record the most frequent watering
intervals and run times that have been used in past peak season settings.
