89
ESP-LXIVM Series Controllers
Set Flow Units
To use Flo-Manager® or FloWatch™ with the ESP-LXIVM
controller, you first need to set the measurement units for
flow management.
Turn the controller dial to Flow Sensor
A
At the FLOW SENSOR screen, press the Down Arrow key to select
Set Flow Units, then press Next.
B
At the Set Flow Units screen, press the + and – keys to set the
desired flow rate (M3/Hr, Auto, GPM, LPS, or LPM). Then press the
Down Arrow key.
A
FLOW SENSOR
Next
Current Flow Reading
Set Flow Units
Set FloWatch
Set FloManager
Set Flow Rates
B
Set Flow Units
Pipe Size
Flow Rate
Done
M3/Hr
Inch
C
Press the + and – keys to set the desired pipe size measurement
(Auto, Inch, or mm).
C
Set Flow Units
Pipe Size
Flow Rate
Done
M3/Hr
mm
B
NOTE: If Auto is selected, Flow Rate will default to GPM when 60
Hz is detected and to LPS when 50 Hz is detected. Pipe Size will
default to Inches on 60 Hz and to millimeters on 50 Hz.
