Rain Bird ESP-12LX+, Installation, Programming, And Operation Manual, Page: 38 / 73

35 ESP-LX+ & LXi+ Installation, Programming, & Operation Guide
Run Station(s) Manually
➊
On 12-, 16-, 20-, and 24-station models, set the
“STATIONS” slide switch to the block of stations
containing the one you want to run.
➋
Turn the dial to the station number you want in the
“WATERING TIME PER STATION” section of the dial.
➌
The display shows the currently selected program, the
station number, and the station’s run time. If the station is
not used in the current program but is used in another
program, the word “USED” will appear in the display
instead of the run time.
➍
Press “PGM” until the display shows a run time for the
station.
➎
Press “MAN. START / ADV.” to operate the selected
station. If you want to run additional stations, repeat steps
3 to 5. Each station you select will run when the previous
station has ended.
➏
After selecting all the stations you want to run, turn the dial
to “AUTO.” The stations you have selected will operate for
their programmed run times and then shut off automatically.
➐
To cancel the manual operation of all selected stations, turn
the dial to “OFF” for three seconds. Then turn the dial back
to “AUTO.”