Priming the Smoke Unit
When preparing to run this engine, add 15-20 drops of smoke fluid through the
smokestack (see Figure 2). We recommend M.T.H. ProtoSmoke, Seuthe, LGB, or
LVTS fluids. Do not overfill the unit or the fluid may leak out and coat the interior
engine components.
If you choose not to add smoke fluid (or have already added fluid but choose to
run smoke-free), turn off the smoke unit by turning the smoke unit conrol fully
counter clockwise.
Failure either to add fluid to the smoke unit or to turn it
off may damage the smoke unit heating element and/or wicking material.
RKS GP7 & GP9 Diesel Engine with PS-2
4
Running the engine without a primed
smoke unit may cause damage
Add Smoke Fluid
Smoke Unit Control
Figure 2. Adding Smoke Fluid
Figure 3. Smoke Unit Control
