RailKing R-12 Subway Set
9
5. Repeat the procedure for the other motor and truck.
6. Reassemble the chassis and body,
being careful that the wires are not
caught between the body and chassis,
as this can lead to a short that may
damage the electronics beyond repair.
7. Before replacing body mount
screws, test the unit on powered track
to make sure all light housings are in
place and functioning. Replace
screws and door slider handles.
Periodically check the locomotive
wheels and pickups for dirt and
buildup, which can cause poor
electrical contact and traction as well
as prematurely wear out the neoprene
traction tires.
Periodically check the locomotive wheels and pickups for dirt and buildup, which can
cause poor electrical contact and traction and prematurely wear out the neoprene traction
tires. Wheels and tires can be cleaned using denatured (not rubbing) alcohol applied with
a cotton swab.
To clean the track, use RailKing Track
Cleaning Fluid and a clean rag or
denatured (not rubbing) alcohol.
Unplug the transformer and wipe the
rails of the track, turning the rag
frequently to ensure that you are using
clean cloth on the rails. Thereafter,
keep an eye on the track and clean it
when it gets dirty to ensure good
Cleaning The Wheels, Tires and Track
Lubricate Worm Gear
Figure 4
