3
Precautions prior to Installation
Precautions prior to Installation
1. Before installation, please refer to Check Package Contents and Accessories and ensure
necessary parts are fully provided. Contact the original distributor in case of any missing
or
damaged
item.
2. Please use the power cord that comes with the package to connect the power supply.
Do not disassemble or modify the device without authorization. Be sure to use 100-240V,
60Hz, power supply. Any unauthorized disassembly or modification may cause damage
to the electronic parts and deprive you of the benefit under the warranty. RAIDON is
not liable and responsible for any damage due to unauthorized disassembly or
modification, if such unauthorized disassembly or modification results in any storage
device failure, data damage or loss, or causes the operating system unable to start.
3. Please carefully go through the Quick Installation Guide and back up your data on the hard
disk drive before installation or use the newly purchased hard disk drive to avoid data loss
in case of inadvertent operation. RAIDON is not reliable and responsible for any data
damage due to inadvertent operation, if such inadvertent operation results in data damage
or loss, or causes the operating system unable to start.
4. Hardware Requirements
Please use an external eSATA II card or RAID card which can support at least 4 ports to
enhance compatibility and transmission efficiency.
5. OS Software Requirements
This product is applicable to any OS system that supports the SATA card.