Indications of LED
LED
Status
LED Status
Power LED
Power On
Blue / Lights On
Power Off
Blue / Blinks
Failed LED
Fan Failed or Overheat (over 55
℃
)
Red / Lighs On
RAID Failed
Red / Blinks
HDD LED
No HDD
--
HDD Idle
Blue / Lights On
HDD Failed
Red / Lights On
Data Access
Blue / Blinks
Rebuilding (Source)
Blue / Blinks
Rebuilding (Target)
Blue & Red / Alternately Blinks
During data auto-rebuilding, LED light may seem idle due to continuous short progressing period of
the files.
Rear view
Note : 1. SL3650 shuts down automatically when press and hold the power button for 5 seconds while the
Power LED blinks (Blue).
2. When SL3650 is booted, press and hold the “Reset” button for 5 seconds to restore system default
value.
3. Before completing the HDD configuration, the “Failed LED” and the “HDD LED” will blinks (Red) and
lights on (Red) respectively. The related LED turns to normal after the HDD configuration is completed.
8 Installation
