iR4300-S2 User Manual
4
5. Get 4 screws from Accessory Kit
and screw and fasten them into
the right positions.
6. Inser all 4 HDD/SSD Trays your iR4300-S2.
7. Install iR4300-S2 into one CD-ROM bay with screws from Accessory Kit,. Then properly connect
SATA Cable and 15-pin Power Supply Cable (from your PC system) to it.
8. The Defauty setting at iR4300-S2 is JBOD mode. At your first time use of it, please turn on your
PC with JBOD mode. You could then start using your iR4300-S2 after hearing one 1-Long+2-Short
Beep.
9. While your iR4300-S2 is ready for use, please follow the instruction of "2. The Standard Procedure
to Switch RAID Setting" in Chapter 6 and set the RAID mode at your wish. You could then start
using your iR4300-S2 now.
