iR4300-S2 User Manual
3
3. Hardware Requirements and Precautions
4. Hardware Installation Procedure
1. Computers or servers with SATA I & SATA II & SATA III.
2. Hard drive with SATA I & SATA II & SATA III
3.
The product allows the user to simultaneously utilize two hard drives manufactured by different
companies. However, if the user expects better efficiency, we strongly recommend the users to
use hard drives manufactured by the same manufacturer.
4. Please ensure that your two HDDs/SSDs are both good products, otherwise, they may damage
your personal data.
5. The actual storage capacity of iR4300-S2 recognized by the system may differ from the total
capacity stated on the hard drives combined once the drives have been formatted.
Please follow the following instructions to complete installation:
Note :
Once the drive mode configuration has been completed, re-configuration using the same hard
drives to set the drive mode will result in complete data loss. If you must change the drive
mode, make sure to backup all data prior to the mode change.
1. Unlock HDD/SSD Tray Key Lock.
2. Press Push-open Button to pull Tray Handles.
3. Extract HDD/SSD Trays.
4. Install a 2.5
”
HDD/SSD onto Tray.
